◆ Carbide Rods,Bars,Blanks,Preforms

The Application of RYDMET CARBIDE Grades for Carbide Rods

Finishing Machining of high hard materials and composite materials.Suitable to make PCB cutter, Drill Bits.

Hi Speed Finishing Machining of high hard materials and composite materials;Copper and Aluminum Alloys, Plastics.
Suitable to make PCB cutter, Drill Bits.

for high-speed cutting tools,especially to those materials above HRC58HRC, such as stainless steel, high temperature alloy etc.

Good toughness and wear resistance, suitable tools for roughly machining of Steel and Cast Iron. Also good materials for Drill Bits.

Excellent toughness and wear resistance,suitable to tools for stainless Steel,heat resistance alloy and high hardness materials.

Rydmet Carbide is a professional manufacturer of Cemented Tungsten Carbide Rods, Carbide Bars, Carbide Blanks, and Carbide Preforms, including:

●Tungsten carbide rods （Diameter 0.5 to 50 mm, Length <600mm，sintered or h6 finish)

●Cemented Solid Carbide Rods （Diameter 0.5 to 50 mm, Length <600mm，sintered or h6 finish)

●Carbide Drill Blanks(Diameter 0.5 to 50 mm, h6 or sintered, weldon shank)

●Cut to length Carbide Endmill Blanks (Diameter 0.5 to 50 mm, h6 or sintered, weldon shank)

●Carbide Square Bars, Carbide Strips

●Carbide Rods for PCB Tools etc ( mainly 1/8 shank or 3.175 mm).

●Carbide Preforms in Sintered or in Finish Ground

●Carbide Rods with 2 helical coolant holes/ducts

●Carbide Rods with 3 helical coolant holes/ducts

We can also Custom-make the Tungsten Carbide products as per your specific demand as sample or Prints.

Standard grade for Cemented Carbide Rods in Rydmet :
The Grades For Cemented Tungsten Carbide Rods
Properties of Grade		RD06UF	RD08UF	RD09UF	RD10F	RD12UF
Co	%	6	8	9	10	12
WC incl. Doping	%	94	90	91%	90	88
Density	g/cm3	14.9	14.45	14.5	14.45	14.1
Vickers Hardness HV30	kg/mm2	1890	1790	1950	1580	1690
Rockwell Hardness HRA	ISO3738	93.5	93	93.8	91.8	>92.5
TRS	N/mm2	3900	4000	3500	3800	4000
Porosity	A	< 02	< 02	< 02	< 02	< 02
	B	0	0	0	0	0
	C	0	0	0	0	0
WC Grain Size	μm	0.5	0.5	0.3	0.8	0.4-0.5